Overhead Control Panel 9980 Self-Propelled Peanut Combine
If the reception is poor, check if the antenna
(A) is in the upright position.
If the radio is
not used or machine is being
transported, fold radio antenna down and
retain with hook (B).
A – Antenna
B – Hook
Mounting
To install an additional radio or CB radio, see
your John Deere dealer.
The antenna mount (A) is located in center of
cab roof. The antenna cable (B) is located on
right-hand side of cab under the armrest.
A – Antenna mount
B – Antenna cable
IMPORTANT! Do NOT install a radio
requiring more than 3 AMPS or electrical
system may malfunction.
80 09/04/15 MAN141
To Next Page
Loading...