Amadas 9980 - Cleaning Combine

9980 Self-Propelled Peanut Combine Lubrication and Maintenance
Cleaning Combine
Keep your combine clean as follows:
Outside of Machine
• Wash outside using a power washer.
• Use soft absorbent cloths to wipe off water
droplets.
•
Use a good, clear wax or glazing
compound that contains no abrasives and
a lint free towel to wax.
• Apply wax or compound by putting on cloth
and rubbing in with a circular motion. After
it is rubbed into the surface well, turn the
towel over and buff with the dry side.
Plastic and Vinyl
• Use tar and road o
il remover to remove
dirt, wax buildup, and other deposits on the
machine’s plastic trim parts.
• Remove dust and dirt with a whisk broom
or vacuum cleaner for interior vinyl and
plastic.
• Clean surfaces with a clean. damp cloth.
• For more thorough cleaning, wipe surface
with soft cloth and mild detergent. Wipe off
any excess.
• Clean vinyl surfaces with leather and vinyl
cleaner.
Fabric
• For water soluble stains, use a damp cloth
first, followed by a soft cloth with a mild
detergent and water.
• Fo
r grease, oil, tar, or other petroleum
based stains, apply fabric cleaner to soiled
surface according to the manufacturer’s
directions.
NOTE! Always follow manufacturer’s
directions for all cleaners. Test each
cleaner on a small hidden area before
using on larger surface.
NOTE! Do NOT clean plastic parts with
fuel or other petroleum based cleaners.
MAN141 09/08/15 337