Safety 9980 Self-Propelled Peanut Combine
Practice Safe Maintenance
• Understand the service procedure before
doing work. Use proper tools and refer to
the User Manual.
• Keep service area clean and dry.
• Lower machine to ground, engage parking
brake, turn off engine, and remove key
before performing maintenance.
• Allow time for the machine to cool
completely.
• Never lubricate, service, or adjust machine
while it is moving.
• Keep hands, feet, and clothing from power-
driven parts.
• Securely support any machine elements
that must be raised for service work.
• Keep all parts in good condition and
properly installed.
• Fix any damage immediately; replace worn
or broken parts.
• Keep the machine free of any buildup of
grease, oil, or debris.
Safely
• Direct exposure to hazardous chemicals
can cause serious injury. Potentially
hazardous chemicals used with AMADAS
equipment include such items as
lubricants, coolants, paints, and
adhesives.
• Before you start any job using a
hazardous chemical, check the MSDS so
that you are aware of the risks and know
how to proceed safely. Carefully follow
all procedures, using only recommended
equipment.
• See your AMADAS dealer for MSDS on
chemical products used with AMADAS
equipment.
Avoid Contact with Moving Parts
• Wear close-fitting clothing to avoid
entanglement with moving parts.
• Keep hands, feet, and clothing away
from power-driven parts.
• Never clean, lubricate or adjust machine
when it is running.
Debris
• The buildup of chaff and crop debris near
moving parts or heat sources is a
hazard.
• Check and clean these areas frequently.
• Before performing any inspection or
service, engage parking brake, turn off
NOTE! This section covers general safety. Some items may not apply to this type of machine.
6 09/16/15 MAN141
To Next Page
Loading...