Amadas 9980 - Page 195

9980 Self-Propelled Peanut Combine Transportation
Driving the Combine on Roads
8.
Press the road transport switch; the
indicator will light up (top photo).
9. Refer to the bottom photo:
• Turn haz
ard light switch ON for both
daytime and nighttime road travel.
• Turn road lights switch
ON for
nighttime travel.
Note that warning lights automatically
operate when the hazard lights are ON.
10. Use the turn signals as needed; note that
they are not self-
canceling and will need
to be turned off after a turn is made.
Road
transport
disconnect
switch
In-use
indicator
NOTE! After you transport the machine to
where you will be working, press the road
transport switch for two seconds until the
indicator light turns off. This will allow you
to operate the combine’s other functions.
CAUTION
Flashing warning lights
and tail lights
provide a warning to operators of vehicles
approaching from the front and rear. Use
the combine’s flashing warning lights
whenever you drive on public roads
UNLESS your locale prohibits the use of
flashing lights.
Make sure the ladder is
swung fully
forward to orient the lights properly toward
oncoming traffic.
Hazard
light
switch
Road
light
switch
MAN141 09/04/15 183