Lubrication and Maintenance 9980 Self-Propelled Peanut Combine
400 Hours or Yearly, Continued
Lube the rear axle power steering outer
fitting on both sides.
Lube the rear axle power steering inner
fitting on both sides.
Lube the rear axle tie rod fitting on both
transmission
and check the fluid.
Add as needed to within 12 mm
(1/2“) of the bottom of the hole.
Fill oil in the final drive at the hole. Check
the oil level up to within 12 mm (1/2“) of
the bottom of the hole at the plug. If you
can touch oil with your little finger, you do
not need to add oil.
328 09/08/15 MAN141
To Next Page
Loading...