Broadcast
147
Fax
4
Note • The above dialing format can be registered in an address number to send using the address
number. For information on how to register address numbers, refer to "Address Book
(Address Number)" (P.347).
îš„Manual Send (transmitting with picking up the telephone or on-hook)
1 Display the [On-hook/Others]
screen by selecting the [On-hook/
Others] tab.
2 Select [On-hook (Manual Send/
Receive)].
3 Select [Manual Send].
4 Select [Alphanumeric] or [Symbol].
5 Use the keyboard shown in the touch screen to enter the following format.
Note • You can specify up to 20 locations for relay recipients.
F Code Method
When the machine is an initiating station, you can perform Relay Broadcast Send if the
F Code that has been set for the relay station and the password (if necessary) are
registered on the machine.
When the machine is a relay station, you can perform Relay Broadcast Send if the F
Code that has been set for the initiating station and the password (if necessary) are
registered on the machine.
Important • When performing Relay Broadcast Send with the F Code method, you can use a password if
you set a receive password for the relay station.
Note • When performing Relay Broadcast Send with machines of this model, we recommend using
the fax signal method.
• When using a machine of a different model as a relay station, confirm the F Code (sub-
address) and password of the target recipient machine.
When using the machine as a relay station, the F Code that is transmitted to the
initiating station is as follows.
îš„Relay Broadcast
Number of digits of the relay station ID:
1: For relay station IDs and address numbers that are 2 digits
2: For relay station IDs and address numbers that are 3 digits
Relay Broadcast
Send
Print
directive
Relay
station ID
Address
Number
Address
Number
Address
Number ....
Up to 20 digits
Address
number
To Next Page
Loading...
Need help?
General
