16 Problem Solving
476
Problem Solving
16
016-733
O O [Cause] 1. Unable to get the string after "@" in the destination IP address
when sending e-mail.
2. Unable to resolve the string after "@" in the Internet
address with DNS.
[Remedy] 1. Check the mail address.
2. Check the DNS server address.
016-734
O [Cause] Failed to print the simple address result report.
[Remedy] Set the e-mail reception setting to [STMP reception] on
the sender's machine.
016-735
O O [Cause] Attempted to print [Job Template List] while updating the
job template.
[Remedy] Retry printing after waiting for a period.
016-736
O [Cause] Any data cannot be saved in the forwarding destination
directory.
[Remedy] Take one of the following actions:
1. Check the free space of the forwarding destination
disk.
2. Check to see whether you have privileges for the
forwarding destination directory.
3. Delete ".LCK" file from the forwarding destination
directory.
016-737
O [Cause] Any data cannot be saved in the forwarding destination
directory.
[Remedy] Delete ".LCK" file from the forwarding destination
directory.
016-738
O [Cause] The booklet printing has been specified with the
PostScript (optional), but the paper size is not available
for booklet printing.
[Remedy] Change to the paper size available for booklet printing,
and retry printing.
016-739
O [Cause] The booklet printing has been specified with the
PostScript (optional), but the document size does not
match the paper size.
[Remedy] Change to the document and paper sizes suitable for the
booklet printing, and retry printing.
016-740
O [Cause] The booklet printing has been specified with the
PostScript (optional), but the paper tray is not available
for booklet printing.
[Remedy] Specify another paper tray available for booklet printing,
and retry printing.
016-746
O [Cause] An unsupported feature is included in the received PDF.
[Remedy] Print using the print driver.
016-748
O O O O [Cause] Unable to print due to insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing up the print
data or printing one copy at a time when making multiple
copies.
016-749
O [Cause] A PJL command syntax error occurred.
[Remedy] Either check the print settings, or correct the PJL
command.
Error Code
Category
Cause and Remedy
CPFSMO
To Next Page
Loading...
