16 Problem Solving
488
Problem Solving
16
034-507
O [Cause] The specified password is not identical with the ID
number of the destination machine.
[Remedy] Check the password and the phone number.
The destination machine may be set not to send its ID
number. Check the setting of the destination machine.
This error code also appears when polling is rejected.
034-508
O [Cause] An error occurred during fax transmission.
[Remedy] Check the settings and the phone number, and send the
fax again. If the machine is not improved by performing
the relevant remedy, contact our Customer Support
Center.
034-509
034-510
034-511
O Refer to 034-508.
034-512
O [Cause] An infinite loop was detected on the remote relay
broadcast.
[Remedy] Check the abbreviated number of the relay broadcast.
Check also the abbreviated number registered in the
relay station.
For more information on the remote relay broadcast feature, refer to
"Remote Relay Broadcast (Performing Relay Broadcast to Remote
Locations)" (P.148).
034-515
O [Cause] The destination machine has a problem.
[Remedy] Check the condition of the destination machine.
034-519
O [Cause] The number of destinations specified for the broadcast
transmission exceeded the upper limit.
[Remedy] Wait until the waiting jobs decrease, or reduce the
number of destinations, and try again.
034-520
O [Cause] The number of waiting jobs exceeded the upper limit.
[Remedy] Wait until the waiting jobs decrease, and try again.
034-522
O [Cause] There is no line available for the manual communication.
[Remedy] Wait until the job in communication is completed, and try
again.
034-523
O [Cause] Unable to accept jobs.
[Remedy] Retry after waiting for a period.
034-528
O [Cause] Manual communication is not available during dialing.
[Remedy] Try again after the dialing.
034-529
O [Cause] Paper with the same size as the received document is not
loaded on the machine.
[Remedy] Check the following:
z
Check the sizes of paper loaded on the machine.
z
Check if the paper trays are correctly inserted.
034-530
O [Cause] Operation time out
[Remedy] Operate within a specified time.
034-703
034-704
034-705
034-706
O [Cause] The phone cable is not correctly connected.
[Remedy] Check the phone cable connection, and send the fax
again. If the machine is not improved by performing the
relevant remedy, contact our Customer Support Center.
Error Code
Category
Cause and Remedy
CPFSMO
To Next Page
Loading...
