Error Code
487
Problem Solving
16
033-738
O [Cause] Received abnormal JBIG data.
[Remedy] No operation is necessary.
033-740
O [Cause] The print job for the received fax document was
interrupted.
[Remedy] No operation is necessary.
033-741
O [Cause] An error occurred during fax transmission.
[Remedy] Try again after waiting for a period. If the machine is not
improved by performing the relevant remedy, contact our
Customer Support Center.
033-742
O [Cause] An error occurred during fax transmission.
This error may occur if the remaining capacity of the
machine's memory is 10% or less and Manual Send is
used.
[Remedy] When this error occurred by Manual Send, connect the
line after storing the document. If the error is still not
cleared, remove unnecessary data from the hard disk to
increase free disk space, and retry again.
If the machine is not improved by performing the relevant
remedy, contact our Customer Support Center.
033-743
033-744
033-745
033-746
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
033-747
O [Cause] The job is in pending status.
[Remedy] No operation is necessary.
033-749
O [Cause] The machine will automatically resume and print out.
[Remedy] No operation is necessary.
033-750
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
034-211
034-212
O [Cause] An error occurred on the fax control system.
[Remedy] Contact our Customer Support Center.
034-500
O [Cause] Unable to communicate due to an incorrect phone
number.
[Remedy] Check the phone number, and try again.
034-501
O [Cause] The specified line does not exist.
[Remedy] Check the line setting, and try again.
034-505
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
034-506
O [Cause] The destination machine does not have the remote copy
feature (for printing the multiple sets of a received
document).
[Remedy] Check if the destination machine has the remote copy
feature.
Error Code
Category
Cause and Remedy
CPFSMO
To Next Page
Loading...
