16 Problem Solving
486
Problem Solving
16
033-722
O [Cause] The document is jammed, or the document pages are
over the limit.
[Remedy] Remove the jammed paper or reduce the document
pages, and retry sending.
033-724
O [Cause] The reception was interrupted because the image volume
exceeded the upper limit.
[Remedy] Attach a HDD or 256MB Memory to increase the
maximum volume of image data.
033-725
O [Cause] The hard disk is full.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
033-726
O [Cause] The received document was printed with the single sided
printing, because the 2-sided printing is not available for a
document with multiple size pages.
[Remedy] No operation is necessary.
033-727
O [Cause] The received page was printed without being rotated,
because its data volume was too large to change the
orientation automatically.
[Remedy] No operation is necessary.
033-728
O [Cause] The Auto Print formatting of the received fax document
was interrupted by a manual print operation.
[Remedy] No operation is necessary. The machine will
automatically start the Auto Print job after manual
printing.
033-730
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
033-731
O [Cause] The print job for the received fax document was
interrupted.
[Remedy] The Auto Print processing of the received fax document
was interrupted by a manual print operation. No operation
is necessary.
033-733
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
033-734
O [Cause] The print job of the received fax document was
interrupted by a report job.
[Remedy] No operation is necessary.
033-735
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
033-736
O [Cause] The forwarding job was interrupted because the data
volume exceeded the upper limit.
[Remedy] No operation is necessary.
033-737
O [Cause] An error occurred during fax transmission.
[Remedy] Try again after waiting for a period.
Error Code
Category
Cause and Remedy
CPFSMO
To Next Page
Loading...
