16 Problem Solving
498
Problem Solving
16
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
O [Cause] The data was automatically modified because it included
an invalid parameter.
[Remedy] The printed image may be incomplete. Check the correct
image, or ask the sender to send the data again. When
using the forwarding feature of iFax, check the data sent
to the e-mail recipient.
116-780
O O [Cause] There is a problem with the document attached to the
received e-mail.
[Remedy] Check the attached document.
116-790
O [Cause] The staple setting was canceled for printing.
[Remedy] Check the staple position and try again.
123-400
O [Cause] Machine malfunction
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
124-701
O [Cause] The output destination was changed to the center tray
due to the malfunction of the specified side tray.
[Remedy] Contact our Customer Support Center. Trays other than
the defective output tray can be used.
124-702
O [Cause] The output destination was changed to the center tray
due to the malfunction of the specified finisher tray.
[Remedy] Contact our Customer Support Center. Trays other than
the defective output tray can be used.
124-703
O [Cause] The output destination was changed to the center tray
due to the malfunction of the specified booklet tray.
[Remedy] Contact our Customer Support Center. Trays other than
the defective output tray can be used.
124-704
O [Cause] The output destination was changed to the center tray
due to the malfunction of the specified output tray.
[Remedy] Contact our Customer Support Center. Trays other than
the defective output tray can be used.
124-705
O [Cause] The punch setting was canceled.
[Remedy] Check the punch position, and try again.
124-706
O [Cause] The folding setting was canceled.
[Remedy] Check the folding setting, and try to print again.
124-709
O [Cause] The document exceeded the maximum number of pages
that can be stapled.
[Remedy] Reduce the number of pages, or cancel the stapling
setting, then try to print again.
Error Code
Category
Cause and Remedy
CPFSMO
To Next Page
Loading...
Need help?
General
