Fuji Xerox ApeosPort 450 I User Manual

Error Code
499
Problem Solving
16
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
133-226
O [Cause] An unsupported country code was specified.
[Remedy] Contact our Customer Support Center.
133-280
133-281
133-282
133-283
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
133-700
O [Cause] The staple/punch setting was canceled.
[Remedy] Check the staple/punch positions, and try again.
134-210
134-211
O [Cause] An error occurred during fax transmission.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our Customer
Support Center.
Error Code
Category
Cause and Remedy
CPFSMO

Fuji Xerox ApeosPort 450 I Specifications

General

Brand	Fuji Xerox
Model	ApeosPort 450 I
Category	Printer
Language	English