Specifications
539
Appendix
17
C Booklet Finisher Specifications
Hole punching Paper size : A3, 11 x 17", A4, A4 , 8.5 x 11", 8.5 x 11" , B4,
B5
Number of holes: 2, 3 (optional) or 4 holes
Paper type: 56 - 169 g/m
2
Important • 80 g/m
2
paper
Dimensions/weight Width 675 x Depth 650 x Height 1,010 mm, 50 kg
Width 775 x Depth 650 x Height 1,058 mm, 50 kg
(When the extension flap is extended)
Space requirements
(when connected to the
main unit)
Width 1,747 x Depth 677 mm
(main unit + C Finisher, when the bypass tray is extended
completely).
Tray type Output tray x 1: Collate/Stack
Finisher tray x 1: Collate (offset stacking available)/
Stack (offset stacking available)
Booklet finisher tray x 1
Paper size Output tray Maximum:A3, 11 x 17"
Minimum :B5 , 56 - 216 g/m
2
Finisher tray Maximum:A3, 11 x 17"
Minimum :B5 , 56 - 216 g/m
2
Booklet finisher tray
Maximum:A3, 11 x 17"
Minimum :A4, 64 - 90 g/m
2
Important • Transparencies and tab paper cannot be used.
Tray capacity Output Tray : 500 sheets
Finisher tray (without stapling):
Paper with width 216 mm or less: 1,500 sheets
Paper with width 216 mm or more:1,500 sheets
mixed stack*: 300 sheets
Finisher tray (with stapling):
Paper with width 216 mm or less:
200 sets or 1,500 sheets
Paper with width 216 mm or more:
100 sets or 1,500 sheets
mixed stack*: 70 sets or 200 sheets
Booklet finisher tray: 15 sets
* Larger size paper is stacked on top of smaller size paper.
Important • 80 g/m
2
paper
Stapling Maximum stapled sheets:50 sheets (90 g/m
2
or less)
Paper size : Maximum: 11 x 17", Minimum: B5
Stapling position: 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • 80 g/m
2
paper
Hole punching Paper size: A3, 11 x 17", A4, A4 , 8.5 x 11", 8.5 x 11" , B4,
B5
Number of holes: 2, 3 (optional) or 4 holes
Paper type: 56 - 169 g/m
2
Important • 80 g/m
2
paper
Center binding/folding Maximum number of sheets: 15 sheets (90 g/m
2
or less)
Paper size: Maximum: A3, 11 x 17", Minimum: A4
Paper type: 60 - 105 g/m
2
Important • 80 g/m
2
paper
To Next Page
Loading...
