Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

13 Accessible drives 385
13.1 Safety notes 385
13.2 Basic information 385
13.3 Optical disk drive (ODD) 387
13.3.1 Storing the ODD latch 387
13.3.2 Installing the ODD (2.5-inch chassis) 387
13.3.3 Removing the ODD (2.5-inch chassis) 390
13.3.4 Replacing the ODD (2.5-inch chassis) 394
13.3.5 Installing the ODD (3.5-inch chassis) 395
13.3.6 Removing the ODD (3.5-inch chassis) 402
13.3.7 Replacing the ODD (3.5-inch chassis) 409
13.4 LTO drive 411
13.4.1 Installing the LTO drive 411
13.4.2 Removing the LTO drive 419
13.4.3 Replacing the LTO drive 426
13.5 RDX drive 428
13.5.1 Installing the RDX drive 428
13.5.2 Removing the RDX drive 437
13.5.3 Replacing the RDX drive 445
14 Front panel 447
14.1 Safety notes 447
14.2 Basic information 447
14.3 Common operation panel (COP) 448
14.3.1 Replacing the COP 448
14.4 Front VGA 454
14.4.1 Installing the front VGA 454
14.4.2 Removing the front VGA 457
14.4.3 Replacing the front VGA 460
Content
RX2540 M6 Upgrade and Maintenance Manual

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5