120 Upgrade and Maintenance Manual
RX300 S8
Power supply units
6.6.5 Reconnecting power cables
Figure 30: Connecting power cables (A)
Ê Connect the cables.
6.6.6 Concluding steps
Ê "Installing the air duct" on page 63
Ê "Mounting the housing cover" on page 65
Ê "Sliding the server into the rack" on page 68
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 65.
Ê "Connecting the server to the power source" on page 69
Ê "Enabling BitLocker functionality" on page 95
To Next Page
Loading...
