RX300 S8
Upgrade and Maintenance Manual 307
Accessible drives
12.5.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 73
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
Ê "Removing the fan box" on page 162
12.5.2 Removing the ODD dummy module
Figure 177: Removing the ODD dummy module
Ê Pull the locking latch upward to unlock the ODD dummy module.
V CAUTION!
Save the ODD dummy module for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
To Next Page
Loading...
