326 Upgrade and Maintenance Manual
RX300 S8
Accessible drives
Figure 197: Removing the tape/RDX drive in the drive cage
Ê Pull the tape/RDX drive out of the bay.
Ê Install two 3.5-inch dummy modules as described in section "Installing a 3.5-
inch dummy module" on page 129
Ê If applicable, remove the USB 3.0 interface card as describe in section
"Removing an expansion card" on page 188
12.9.4 Concluding steps
Ê "Installing the fan box" on page 164
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Verifying and configuring the backup software solution" on page 86
Ê "Enabling BitLocker functionality" on page 95
To Next Page
Loading...
