392 Upgrade and Maintenance Manual
RX300 S8
Front panel and external connectors
13.3.3 Replacing the front LAN connector and board
13.3.3.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 73
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
Ê "Removing the fan box" on page 162
13.3.3.2 Removing the front panel module
Ê Remove the front panel module as described in section "Removing the front
panel module" on page 363.
13.3.3.3 Removing the defective front LAN connector
Ê "Removing the front LAN connector" on page 388
13.3.3.4 Installing the new front LAN connector
Ê "Installing the front LAN connector" on page 378
13.3.3.5 Re-installing the front panel module
Ê "Installing the front panel module" on page 365
13.3.3.6 Concluding steps
Ê "Installing the fan box" on page 164
Upgrade and Repair Unit
(URU)
Hardware: 15 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
