RX300 S8
Upgrade and Maintenance Manual 221
Expansion cards and backup units
9.6.5 Installing a FBU
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 39.
9.6.5.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 74
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
9.6.5.2 Installing TFM to the RAID controller (if applicable)
I To connect an FBU to the controller D3116 you need a TFM. Other
controllers so as D9285 can be connected directly.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
To Next Page
Loading...
