RX300 S8
Upgrade and Maintenance Manual 335
Accessible drives
12.11.5 Concluding steps
Ê "Installing the fan box" on page 164
Ê "Installing the front cover" on page 446
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Verifying and configuring the backup software solution" on page 86
Ê "Enabling BitLocker functionality" on page 95
12.12 Removing a tape/RDX drive in 2.5-inch
version
12.12.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 73
Ê "Locating the defective server" on page 51
Ê "Removing backup and optical disk media" on page 76
Ê "Verifying and configuring the backup software solution" on page 77
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
Ê "Removing the front cover" on page 443
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
