RX300 S8
Upgrade and Maintenance Manual 323
Accessible drives
Figure 193: Connecting the USB cable to the USB 3.0 interface card
Ê Route the cable as shown (1).
Ê Connect the USB cable to the USB 3.0 interface card (2).
12.8.5 Concluding steps
Ê "Installing the fan box" on page 164
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Verifying and configuring the backup software solution" on page 86
Ê "Enabling BitLocker functionality" on page 95
12.9 Removing a tape/RDX drive in 3.5-inch
version
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
