RX300 S8
Upgrade and Maintenance Manual 285
Processors
– Remove the desired processor as described in section "Removing the
processor" on page 278.
– Install the new processor as described in section "Installing the new
processor" on page 268.
11.4.3 Concluding steps
Ê "Installing processor heat sinks" on page 286
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê If applicable, "Updating or recovering the system board BIOS and iRMC" on
page 80
Ê "Switching on the server" on page 71
Ê "Enabling SVOM boot watchdog functionality" on page 89
Ê "Enabling BitLocker functionality" on page 95
To Next Page
Loading...
