Name: Fujitsu PRIMERGY RX300 S8
Brand: Fujitsu
Rating: 4 (1 reviews)

To Next Page

To Previous Page

308 Upgrade and Maintenance Manual

RX300 S8

Accessible drives

Figure 178: Removing the dummy module

Ê Pull the ODD dummy module out.

12.5.3 Preparing an ODD

Figure 179: Location for the unused ODD holder

Ê Take the ODD holder from its place on the bottom of the front panel module.

Other manuals for Fujitsu PRIMERGY RX300 S8

Questions and Answers:

Need help?

Do you have a question about the Fujitsu PRIMERGY RX300 S8 and is the answer not in the manual?

General

Memory	Up to 768 GB DDR3
Form Factor	2U rack server
Remote Management	iRMC S4 (Integrated Remote Management Controller)
Chipset	Intel C602
Processor	Intel Xeon E5-2600 v2 product family
Storage	Up to 16 x 2.5" or 8 x 3.5" drives
RAID	RAID 0, 1, 5, 6, 10, 50, 60
Network	4 x Gigabit Ethernet ports
Expansion Slots	6 x PCIe 3.0 slots
Operating System Support	Windows Server, Red Hat, SUSE, VMware
Memory Type	DDR3 RDIMM/LRDIMM
Power Supply	Hot-plug redundant power supply units