Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

134 Upgrade and Maintenance Manual RX300 S8
Hard disk drives / solid state drives
7.3.1.6 HDD / SSD naming scheme for 12x 2.5-inch HDD / SSD
configuration
I The HDD / SSD numbering as listed in the ServerView RAID Manager
differs from the HDD mounting order:
7.3.1.7 HDD / SSD mounting order for 12x 2.5-inch HDD / SSD
configuration
Figure 43: 2.5-inch HDD / SSD mounting order configuration 8
2.5-inch HDDs / SSDs
HDD RAID Manager #
1 [0]
2 [1]
3 [2]
4 [3]
5 [4]
6 [5]
7 [6]
8 [7]
9 [8]
10 [9]
11 [10]
12 [11]
Table 8: HDD naming scheme

Fujitsu PRIMERGY RX300 S8 Specifications

General

Memory	Up to 768 GB DDR3
Form Factor	2U rack server
Remote Management	iRMC S4 (Integrated Remote Management Controller)
Chipset	Intel C602
Processor	Intel Xeon E5-2600 v2 product family
Storage	Up to 16 x 2.5" or 8 x 3.5" drives
RAID	RAID 0, 1, 5, 6, 10, 50, 60
Network	4 x Gigabit Ethernet ports
Expansion Slots	6 x PCIe 3.0 slots
Operating System Support	Windows Server, Red Hat, SUSE, VMware
Memory Type	DDR3 RDIMM/LRDIMM
Power Supply	Hot-plug redundant power supply units