Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

430 Upgrade and Maintenance Manual RX300 S8
System board and components
14.5.3 Replacing the onboard SAS enabling key
14.5.3.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 73
Ê "Locating the defective server" on page 51.
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
14.5.3.2 Replacing the onboard SAS enabling key
Ê "Removing onboard SAS enabling key" on page 429
Ê "Installing the onboard SAS enabling key" on page 426
14.5.3.3 Concluding steps
Ê "Reassembling" on page 63.
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Enabling BitLocker functionality" on page 95
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: tool-less

Fujitsu PRIMERGY RX300 S8 Specifications

General

Memory	Up to 768 GB DDR3
Form Factor	2U rack server
Remote Management	iRMC S4 (Integrated Remote Management Controller)
Chipset	Intel C602
Processor	Intel Xeon E5-2600 v2 product family
Storage	Up to 16 x 2.5" or 8 x 3.5" drives
RAID	RAID 0, 1, 5, 6, 10, 50, 60
Network	4 x Gigabit Ethernet ports
Expansion Slots	6 x PCIe 3.0 slots
Operating System Support	Windows Server, Red Hat, SUSE, VMware
Memory Type	DDR3 RDIMM/LRDIMM
Power Supply	Hot-plug redundant power supply units