340 Upgrade and Maintenance Manual
RX300 S8
Accessible drives
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
Ê "Removing the front cover" on page 443
Ê "Removing the fan box" on page 162
12.13.2 Removing the defective tape/RDX drive
Ê "Removing the drive cage" on page 336
Ê "Removing a tape/RDX drive out of the cage" on page 337
12.13.3 Installing the new tape/RDX drive
Ê "Installing a tape/RDX drive in the cage" on page 329
Ê "Installing the tape/RDX drive" on page 331
12.13.4 Concluding steps
Ê "Installing the fan box" on page 164
Ê "Installing the front cover" on page 446
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Verifying and configuring the backup software solution" on page 86
Ê "Enabling BitLocker functionality" on page 95
12.14 Installing an LTO drive in 2.5-inch version
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
To Next Page
Loading...
