350 Upgrade and Maintenance Manual
RX300 S8
Accessible drives
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Verifying and configuring the backup software solution" on page 86
Ê "Enabling BitLocker functionality" on page 95
12.15 Removing an LTO drive in 2.5-inch version
12.15.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 73
Ê "Locating the defective server" on page 51
Ê "Removing backup and optical disk media" on page 76
Ê "Verifying and configuring the backup software solution" on page 77
Ê "Shutting down the server" on page 54
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
Ê "Removing the front cover" on page 443
Ê "Removing the fan box" on page 162
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
