RX300 S8
Upgrade and Maintenance Manual 429
System board and components
14.5.2.2 Removing onboard SAS enabling key
Figure 285: onboard SAS enabling key mounting location
Ê Firmly pull up on the release lash until the onboard SAS enabling key pops
out of its connector.
14.5.2.3 Concluding steps
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê "Switching on the server" on page 71
Ê "Enabling BitLocker functionality" on page 95.
To Next Page
Loading...
