258 Upgrade and Maintenance Manual
RX300 S8
Main memory
10.3.3 Concluding steps
Ê "Reassembling" on page 63
Ê "Connecting the server to the power source" on page 69
Ê "Updating or recovering the system board BIOS and iRMC" on page 80
Ê "Switching on the server" on page 71
Ê "Enabling SVOM boot watchdog functionality" on page 89
Ê "Enabling BitLocker functionality" on page 95
10.4 Replacing memory modules
10.4.1 Preliminary steps
Ê "Locating the defective server" on page 51
Ê Identify the defective memory slot using the server management software.
Ê "Disabling BitLocker functionality" on page 73
Ê "Disabling SVOM boot watchdog functionality" on page 74
Ê "Shutting down the server" on page 54.
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 57
Ê Locate the defective memory module using the onboard Local Diagnostic
LEDs as described in section "Onboard indicators and controls" on
page 489.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: tool-less
To Next Page
Loading...
