RX300 S8
Upgrade and Maintenance Manual 141
Hard disk drives / solid state drives
Figure 49: Installing a 2.5-inch dummy module
Ê Slide the dummy module into the drive bay until it locks in place.
7.3.3.4 Concluding steps
Ê "Performing a RAID array rebuild" on page 96
7.3.4 Replacing a 2.5-inch HDD / SSD module
V CAUTION!
●
Only remove an HDD / SSD module during operation if the drive is
not currently being accessed. Observe the indicators for the
corresponding HDD / SSD modules, see operating manual of your
server.
Customer Replaceable Unit
(CRU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
