Fujitsu PRIMERGY RX300 S8

RX300 S8 Upgrade and Maintenance Manual
Contents
9.3.1.3 Installing an expansion card . . . . . . . . . . . . . . . . . 183
9.3.1.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 184
9.3.2 Removing expansion cards . . . . . . . . . . . . . . . . . . . 185
9.3.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 185
9.3.2.2 Removing an expansion card . . . . . . . . . . . . . . . . 185
9.3.2.3 Installing a PCI slot bracket . . . . . . . . . . . . . . . . . 187
9.3.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 187
9.3.3 Replacing expansion cards . . . . . . . . . . . . . . . . . . . 188
9.3.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 188
9.3.3.2 Removing an expansion card . . . . . . . . . . . . . . . . 188
9.3.3.3 Installing an expansion card . . . . . . . . . . . . . . . . . 189
9.3.3.4 Connecting cables to the expansion card . . . . . . . . . . 189
9.3.3.5 Connecting a battery backup unit to the expansion card . . . 189
9.3.3.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 189
9.4 SAS RAID controller in PCI slot 7 . . . . . . . . . . . . . . . 190
9.4.1 Installing the SAS RAID controller . . . . . . . . . . . . . . . . 190
9.4.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 190
9.4.1.2 Preparing the SAS RAID controller . . . . . . . . . . . . . 190
9.4.1.3 Installing the SAS RAID controller . . . . . . . . . . . . . . 191
9.4.1.4 Connecting cables to the expansion card . . . . . . . . . . 192
9.4.1.5 Connecting a backup unit to the expansion card . . . . . . . 192
9.4.1.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 192
9.4.2 Removing the SAS RAID controller . . . . . . . . . . . . . . . 193
9.4.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 193
9.4.2.2 Removing the SAS RAID controller . . . . . . . . . . . . . 194
9.4.2.3 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 194
9.4.3 Replacing the SAS RAID controller . . . . . . . . . . . . . . . 195
9.4.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 195
9.4.3.2 Removing the defective SAS RAID controller . . . . . . . . 196
9.4.3.3 Installing the new SAS RAID controller . . . . . . . . . . . 196
9.4.3.4 Connecting cables to the expansion card . . . . . . . . . . 196
9.4.3.5 Connecting a backup unit to the expansion card . . . . . . . 196
9.4.3.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 196
9.5 Modular LAN controller in PCI slot 1 . . . . . . . . . . . . . 197
9.5.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . . 197
9.5.2 Installing the Modular LAN controller . . . . . . . . . . . . . . 197
9.5.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 197
9.5.2.2 Connecting the NCSI sideband cable to the Modular LAN
controller . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
9.5.2.3 Installing the Modular LAN controller . . . . . . . . . . . . . 200
9.5.2.4 Connecting the NCSI sideband cable to the system board . 201