NTP-007: Circuit Order 365-575-102
Page2of2 Issue8.0,July2002
Circuit Order: NTP-007---+---DLP-501-------Operation: NTP-002
|---DLP-524-------DLP-501-------Operation: NTP-002
5. At the local FT-2000 end terminal and at the CIT,
select
FAULT-Switch-Line-Protection and
Priority set to preemptible.
—
6. At both FT-2000 network elements, verify the NE
ACTY LED is off. An assistant is required at
the remote FT-2000 end terminal.
—
7. Restoration protection access has been
established.
—
DOITEMSBELOWINORDERLISTED....... FORDETAILS,GOTO
To Next Page
Loading...