Lucent Technologies FT-2000 OC-48 User Manual

Applications
2-38 Issue 8.0 July 2002
Figure 2-18 shows WDM used in repeater sections.
Figure 2-18. Section by Section Wavelength Division Multiplexing
(1.3 µm/1.5 µm)
In Release 6 and later releases, the FT-2000 OC-48 Add/Drop-Rings Terminal
may be equipped with the OC48 Transmitter, Add/Drop(A/D) — 1.5µmLBA
Wavelength 1 (OC48 TRMTR [A/D 1.5 LBA W1]) and the OC48 Transmitter,
Add/Drop(A/D) — 1.5µm LBA Wavelength 2 (OC48 TRMTR [A/D 1.5 LBA W2])
circuit packs in WDM applications. In Release 7 and later releases, the FT-2000
OC-48 Add/Drop-Rings Terminal may be equipped with the OC48 TRMTR (A/D
STS1 1.5 LBA, W1) and the OC48 TRMTR (A/D STS1 1.5 LBA, W2) circuit packs
in WDM applications. The 7A WDM Filter Assembly is recommended for use with
these OC48 TRMTR circuit packs.
WDM
WDM
1.5 m
1.3 m
1.5 m
1.3 m
WDM
WDM
WDM
WDM

Lucent Technologies FT-2000 OC-48 Specifications

General

Brand	Lucent Technologies
Model	FT-2000 OC-48
Category	Network Hardware
Language	English