NTP-011: Operation 365-575-102
Page4of8 Issue8.0,July2002
Operation: NTP-011---+---DLP-501
|----TAP-102
|---DLP-503
|---DLP-512
|----DLP-536
|----DLP-542
14. Use the CIT and log into ring-2 and node-2
using the expert mode by entering cit
expert.
—
15. From the work order, identify what
cross-connections are required for that
particular node. If so, then enter the
cross-connections.
DLP-536
16. From the work order, determine whether a DCC
assignment is required for that particular node. If
so, then enter the assignment.
DLP-542
17. This completes the procedure to connect two
FT-rings via OC-3 links.
—
DOITEMSBELOWINORDERLISTED........ FORDETAILS,GOTO
To Next Page
Loading...
Need help?
General