TAP-102: Trouble Clearing 365-575-102
Page2of8 Issue8.0,July2002
4. Was "env-(1-16)", the Source Address recorded in Step 3?
If YES, then go to TAP-107.
If NO, then continue with Step 5.
5. Find the Description information that was recorded in Step 3 in Table A and
go to the referenced TAP.
Table A - Trouble Conditions
Description Go To TAP
APS channel failure TAP-105
APS provisioning conflict TAP-150
circuit audit suspended TAP-161
circuit provisioning error TAP-162
clock out of range TAP-134
CP reset in progress TAP-151
CP (unknown type ) failure TAP-123
CP (unknown type ) removed TAP-148
CPYPGM:IP tid TAP-159
DCC startup in progress TAP-129
DRI auto switch TAP-149
DRI manual switch TAP-149
DS3 INTFC failure TAP-111
DS3 INTFC removed TAP-112
DS3 loopback TAP-114
DS3 path unequipped TAP-156
DS-NE not reachable TAP-137
duplicate node id defined TAP-138
duplicate TID defined TAP-138
EC1 loopback TAP-114
excessive holdover TAP-117
extra traffic preempted TAP-143
fan failure TAP-118
Continued on next page
To Next Page
Loading...
Need help?
General