365-575-102 Trouble Clearing: TAP-114
Issue 8.0, July 2002 Page 3 of 4
logins inhibited SECURITY-Set-Security-Network
Element-Logins Allowed:Yes
LS forced switch FAULT-Switch-Low Speed-All-Reset
LS lockout
LS manual switch
DS3 loopback FAULT-Release-Loopback-<LS type>-All
EC1 loopback
LS loopback
OC3 loopback (from OC3)
OC12 loopback (from OC48)
OC3 loopback (from OC48)
sync mode equipment conflict CONFIGURATION-Set-OC48-Sync
Messages-Disabled
sync mode forced switch FAULT-Switch-Synchronization-<type
of switch>-Reset
sync reference forced switch
sync reference lockout
sync reference manual switch
TG manual switch
test alarm in progress Wait for the test to complete.
test auto turnup in progress
test telemetry in progress
Table A - Determine Command for Condition
Condition To Be Cleared Perform Function
To Next Page
Loading...
Need help?
General