DLP-517: Detailed Level Procedure 365-575-102
Page2of2 Issue8.0,July2002
2. Repeat Step 1 for the next parameter to be provisioned.
3. If desired, verify the parameter (just provisioned) by obtaining a State Report.
Reference: DLP-516
4. STOP! YOU HAVE COMPLETED THIS PROCEDURE.
Table B - DS-3 and EC-1 Port Parameters
Parameter DS-3 Input (Command) EC-1 Input (Command)
Violation
Monitor/Removal
Mode
CONFIGURATION-Set-T3 None
Alarm Attribute CONFIGURATION-Set-T3 CONFIGURATION-Set-EC1
Signal Degrade
Threshold
CONFIGURATION-Set-T3 CONFIGURATION-Set-EC1
Primary State CONFIGURATION-Set-State-T3 CONFIGURATION-Set-State-EC1
To Next Page
Loading...
Need help?
General