365-575-102 DetailedLevelProcedure:
Issue 8.0, July 2002 Page 1 of 4
DLP-522
Change, Delete, or Enter a User's Login
Overview: This procedure covers login aging and password aging in addition to
changing, deleting, or entering a user's login.
!
CAUTION:
These tasks can only be performed by one of two privileged users. Privileged
users cannot change their own login.
!
CAUTION:
Additional information about security and aging is provided in Section 8,
"Administration and Provisioning."
1. If required, connect and condition the craft interface terminal (CIT).
Reference: DLP-501
2. What do you want to do to a user's login?
If to change a user's login, continue with Step 3.
If to deleteauser'slogin, continue with Step 7.
If to enter a new user's login, continue with Step 10.
If to enable/disable login aging, continue with Step 16.
If to enable/disable password aging, continue with Step 16.
Change Login
3. At the CIT, select SECURITY-Set-Login-Change: for the specified user's
login to be changed.
4. Select the appropriate input parameter (new login, password, verify password,
user privilege, and status), make the change, and press function key F9 to
execute the change(s).
5. At the CIT, select SECURITY-Retrieve-Login: to obtain the Login
Provisioning Report and verify that the user's login has been changed.
6. STOP! YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...
Need help?
General