Administration and Provisioning
Issue 8.0 July 2002
8-49
■ CONFIGURATION-Retrieve-Crossconnection-STS1: This input
generates a report showing all the existing STS-1 cross-connections in the
FT-2000 OC-48 Add/Drop-Rings Terminal. The
FAULT-Retrieve-History input also generates a report that can be
used to find out how a cross-connection was entered. For more
information about the STS-1 Cross-Connection Map Report and History
Report, refer to Volume I, Section 11, "Craft Interface Terminal Usage."
■ CONFIGURATION-Retrieve-Crossconnection-STS3: This input
generates a report showing all the existing STS-3 cross-connections in the
FT-2000 OC-48 Add/Drop-Rings Terminal. The
FAULT-Retrieve-History input also generates a report that can be
used to find out how a cross-connection was entered. For more
information about the STS-3 Cross-Connection Map Report and History
Report, refer to Volume I, Section 11, "Craft Interface Terminal Usage."
NOTE:
For software releases 7.0 and 7.1, the command
CONFIGURATION-Retrieve-Crossconnection-STS3 works
properly--provided that the command aid field is left "null". An
example of a specified aid, which will not work, is (STS3-1E-1). For
software release 7.2 and later, only the STS1 option works, e.g.,
CONFIGURATION-Retrieve-Crossconnection-STS1.
■ CONFIGURATION-Retrieve-Squelch Map-STS1: For Release 7.0
and earlier releases, this input generates a report showing the STS-1 level
squelch map of the FT-2000 OC-48 Add/Drop-Rings Terminal. If there is
an entry(s) in the STS-1 squelch map report, the
CONFIGURATION-Retrieve-Crossconnection-STS3 generates a
report that will also include a warning that additional squelch map
informationisprovidedintheCONFIGURATION-Retrieve-Squelch
Map-STS1 report. For more information about the STS-1 Squelch Map
Report, refer to Volume I, Section 11, "Craft Interface Terminal Usage."
■ CONFIGURATION-Retrieve-Squelch Map-STS3: For Releases 7.0
and earlier releases, this input generates a report showing the STS-3 level
squelch map of the FT-2000 OC-48 Add/Drop-Rings Terminal. For more
information about the STS-3 Squelch Map Report, refer to Volume I,
Section 11, "Craft Interface Terminal Usage."
To Next Page
Loading...