EasyManua.ls Logo

Lucent Technologies FT-2000 OC-48 - Page 46

Lucent Technologies FT-2000 OC-48
1578 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
About This Document
xlvi Issue 8.0 July 2002
Number: 824-102-151
Title:
DDM-2000 Multiplexers Operations Systems Engineering Guide
Audience: Engineers
Content: Operations systems engineering information for the DDM-2000
Multiplexers
Number: 824-102-148
Title:
FT-2000 OC-48 Lightwave System Operations Systems Engineering
Guide
Audience: Engineers
Content: Operations systems engineering information for the FT-2000 OC-
48 Lightwave System
Number: MIP0030-MV
Title:
Modification Implementation Procedure 0030-MV, FT-2000 End
Terminal to 2-Fiber Add/Drop-Rings Terminal Out-of-Service Upgrade
Audience: RTAC, Installers, Engineers, Planners
Content: Procedures for upgrading out-of-service FT-2000 OC-48 1x1 End
Terminals to FT-2000 OC-48 Add/Drop-Rings Terminals for 2-Fiber Rings
Number: MIP0036-MV
Title:
Modification Implementation Procedure 0036-MV, FT-2000 End
Terminal to 2-Fiber Add/Drop-Rings Terminal In-Service Upgrade
Audience: RTAC, Installers, Engineers, Planners
Content: Procedures for transferring service off an in-service FT-2000
OC-48 1x1 End Terminal in preparation for the MIP0030-MV out-of-service
upgrade to be performed
Number: MIP0046-MV
Title:
Modification Implementation Procedure 0046-MV, FT-2000 Add/Drop
Ring Terminal DCC Cable Upgrade
.
Audience: RTAC, Installers, Engineers, Planners
Content: Convert an in-service FT-2000 OC-48 ADR Terminal J68974, L3
or equivalent to an ADR Terminal with OC-3 Data Communications
Channel (DCC) capability, J68974, L5 or equivalent

Table of Contents