Administration and Provisioning
Issue 8.0 July 2002
8-79
— Destination STS-3 tributary (tributary 6).
â– At node 1, the 1-way through cross-connection is deleted by specifying:
— Source (tributary)
— Source line (line 1W)
— Source STS-3 tributary (tributary 6)
— Destination (tributary).
The 1-way drop cross-connection is deleted by specifying:
— Source (tributary)
— Source line (line 1W)
— Source STS-3 tributary (tributary 6)
— Destination (slot)
— Destination low-speed interface slot
*
(slot 4A).
â– At node 2, the 1-way drop cross-connection is deleted by specifying:
— Source (tributary)
— Source line (line 1W)
— Source STS-3 tributary (tributary 6)
— Destination (slot)
— Destination low-speed interface slot
*
(slot 5A).
â– The 2-way add/drop cross-connection is deleted by specifying:
— Source (slot)
— Source low-speed interface slot
*
(slot 2A)
— Destination line (line 1E)
— Destination STS-3 tributary (tributary 5).
â– At node 3, the 2-way add/drop cross-connection is deleted by specifying:
— Source (tributary)
— Source line (line 1W)
— Source STS-3 tributary (tributary 5)
— Destination (slot)
— Destination low-speed interface slot
â€
(slot 7A).
* If the specified slot is part of a slot pair (for example, slot 1A and 1B) that has been
provisioned for the OC-3 1+1 protected mode, specifying one slot also includes the
companion slot. The same type of logic applies to OC-12 1+1 protected mode.
To Next Page
Loading...
Need help?
General