Administration and Provisioning
8-88 Issue 8.0 July 2002
Deleting OC-3 DCC Assignments 8
The OC-3 DCC assignments Figure 8-27 may be deleted using the
CONFIGURATION-Delete-Assignment-DCC input.
■ At CO 1, an OC-3 DCC assignment is deleted by specifying:
— Low-speed interface slot (slot 5B)
— DCC (channel 3).
■ At CO 2, an OC-3 DCC assignment is deleted by specifying:
— Low-speed interface slot (slot 2A)
— DCC (channel 6).
For more information about deleting OC-3 DCC assignments at an FT-2000
OC-48 Add/Drop-Rings Terminal, refer to the Operation Task Index in the
"Operation and Maintenance (TOP)" section (Volume II).
To Next Page
Loading...