Lucent Technologies FT-2000 OC-48 - Page 504

Administration and Provisioning
8-100 Issue 8.0 July 2002
Line Protection Switching
- Wait to Restore 0-12 Minutes [5]
CIT
CONFIGURATION-
Set-Protection-
Line
CONFIGURATION-
Retrieve-
Protection-Line
- Ring Switching-Provisioned Enabled, [Disabled]
Protection Access [Preemptible], Temporary,
Permanent
CIT CONFIGURATION-E
nter-Protection
-STS1 or STS3
CONFIGURATION-Re
trieve-
Protection-STS1
Operations
- Operation Ports DCE, DTE, X.25 Choice † None SECURITY-Retriev
e-Security Port
- Operation Port Baud Rates
CIT (DCE) 1200, 2400, 4800, 9600
[No Original Value] Autobaud
TBOS 2400 Fixed
CIT (DTE) 1200, 2400, 4800, 9600 None None
[No Original Value]
X.25‡ 1200, 2400, 4800, 9600, Automatic
19200 [No Original Value]
- Remote Access
Far End Termina§l
Remote Activity Reporting
Remote Office Alarms
[LTXX], Other
Enable, [Disable]
Enable, [Disable]
CIT SECURITY-Set-Fa
r End
Communications
SECURITY-Retriev
e-Far End
Communications
- Network Element Security
Logins Allowed
Password Aging*
Login Aging***
[Yes], No
[0], 7-999 Days
[0], 7-999 Days
CIT
SECURITY-Set-Se
curity-Network
Element
SECURITY-Retriev
e-Security-Netwo
rk Element
- Port Security
Type (Prior to Release 5)
Type (Release 5 and Later)
CIT-DCE, CIT-DTE, CIT-DCC,
[All]
DCE, DTE, DCC, X.25, [All]
[No Original Value]
Port Access [Enable], Disable
Port Protocol***
CIT (DCE) [CIT], TL1
CIT (DTE ) [CIT], TL1
See footnotes at end of table.
Table 8-5. Provisionable Parameters (FT-2000 OC-48 Add/Drop-Rings Terminal) (Contd)
Parameter Options [Original Value] Method
CIT-PC Input
[TL1 Command]
CIT-PC Report
[TL1 Report]