Lucent Technologies FT-2000 OC-48 - Page 512

Administration and Provisioning
8-108 Issue 8.0 July 2002
* Select the desired port by installing the appropriate cabling.
† Available in Release 4 and later releases.
‡ At startup there are exactly two privileged logins and no others.
§ FT-2000 is the original value of the password for ATT01 and ATT02.
There is no original password value for any other logins.
- Seconds 0-59 [0] Set-Date Retrieve-Date
- Standard Time Zone [
blank ] ≤ 3 Letter Characters
- Start Daylight Savings Date MM-DD [01-01]
- Stop Daylight Savings Date MM-DD [01-01]
- Daylight Savings Time Zone [
blank ] ≤ 3 Letter Characters
Line Identification
- Line Name PE, PW, 1E, 1W Automatic None CONFIGURATION-
Retrieve-OC48
OC-48 Termination
LBO (Optical) 0, 5, 10, 15, or 20 dB Lightguide None None (LBO Ring
Jumper (Manually Installed) Color or
Stamping on LBO)
Slot State Provisioning FAULT-
- All Slots EQ, [AUTO] Automatic None Retrieve-State
Table 8-7. Provisionable Parameters (FT-2000 OC-48 Repeater Bay)
Parameter Options [Original Value] Method Input (Command) Report