Administration and Provisioning
Issue 8.0 July 2002
8-107
FT-2000 OC-48 Repeater Bay
Table 8-7 shows the provisionable parameters of the FT-2000 OC-48 Repeater Bay. This
includes the parameters that can be provisioned using the CIT, plus the parameters that are
automatically provisioned or have fixed values (cannot be changed). The original value for
each provisionable parameter in Table 8-7 is shown in brackets [ ].
Table 8-7. Provisionable Parameters (FT-2000 OC-48 Repeater Bay)
Parameter Options [Original Value] Method Input (Command) Report
System Address SECURITY-Set- SECURITY-
- Target Identifier (TID) [LT-FT-2000] ≤
20 characters
CIT Network Element Retrieve-Network
- Site Address
site-line-site number
Automatic None Element
Operations
SECURITY-
- Operation Ports CIT (DCE), CIT (DTE) Choice* None Retrieve-
Security Port
- Operation Port Baud Rates
CIT (DCE) 1200, 2400, 4800, 9600
[No Original Value] Autobaud None None
CIT (DTE) 1200, 2400, 4800, 9600
[No Original Value]
Network Element Security SECURITY-Set SECURITY-Retrieve
Logins Allowed [Yes], No CIT Security- Security-
Network Element Network Element
- Port Security
Type CIT-DCE, CIT-DTE, CIT-DCC,
[All]
CIT SECURITY-Set- SECURITY-Retrieve-
Port Access [Enable], Disable Security Port Security Port
Timeout†0-999 Minutes [15] CIT CIT-PC Setup Menu None
-LoginSecurity
Logins 1-12 [LUC01
or
LUC02‡]
1to10
CIT SECURITY- SECURITY-
Alphanumeric Characters
Set-Login Retrieve-Login
Password [FT-2000§]
6 to 10 Characters
, SECURITY-Set-
(at least 1 numeric character
CIT Password None
and 1 symbolic character)
User Privilege Reports Only, [General] CIT SECURITY- SECURITY-
Set-Login Retrieve-Login
- User-Settable Miscellaneous
Discretes
Description of ["Environment "] ≤
26 Characters
CONFIGURATION- CONFIGURATION-
Environmental Inputs 1-16 CIT Set-Attribute Retrieve-Attribute
Environmental Input CR, MJ, [MN], NA, NR Environment Environment
Alarm Level
- Date YY-MM-DD [94-06-30] CIT
- Hours 0-23 [0]
- Minutes 0-59 [0] CIT CONFIGURATION- CONFIGURATION-