Lucent Technologies FT-2000 OC-48 User Manual

Administration and Provisioning
8-142 Issue 8.0 July 2002
If "All" is specified for the Type parameter, the Port Access
parameter will only be set for the CIT-DTE port, since Port Access
may never be disabled for the CIT-DCE.
— The Port Access parameter enables or disables access. Disabling it
will terminate any active session on the port, logging out all users
including privileged users.
For more information about these inputs, refer to Volume I, Section 11, "Craft
Interface Terminal Usage."

Lucent Technologies FT-2000 OC-48 Specifications

General

Brand	Lucent Technologies
Model	FT-2000 OC-48
Category	Network Hardware
Language	English