Craft Interface Terminal Usage
Issue 8.0 July 2002
11-61
Release 7.2.10
BOSTON 02-05-02 13:41:54 EDT
M Retrieve-Crossconnection-All: COMPLD
/* Cross-Connection Map Report
(..stby STS1,::stby STS3,--act STS1,==act STS3,*Invalid Flag,+AUDIT set to No)
==============================================================================
Destination/Source Cross-Connection Source/Destination
==============================================================================
DALLAS 1w-1 <=>3a 1e-1 -
1w-1-1 1e-1-1 -
1w-1-2 5a-2<->1e-1-2 ATLANTA
1w-1-3 5a-3<->1e-1-3 ATLANTA
DALLAS 1w-2 <=>3b 7a<=> 1e-2 ATLANTA
DALLAS 1w-3 <=>4a 7b<=> 1e-3 ATLANTA
DALLAS 1w-4 <=>4b 1b<=> 1e-4 ATLANTA
DALLAS 1w-5 <=>5b 1e-5 -
=============================================================================
To Next Page
Loading...
Need help?
General