Craft Interface Terminal Usage
Issue 8.0 July 2002
11-77
The information displayed may also be incomplete when an NE status comm
failure condition exists; but, for Release 6, the above warning statement is not
displayed for such a condition. Future releases will output the above warning
statement when the NE status comm failure condition exists.
The fields of the report are described below:
System Alarm - Shows the highest system alarm at each node in the ring network.
The alarm corresponds to the topmost user panel LED that is lit at
an FT-2000 network element or the alarm level reported by the
FT-2000 repeater bay/shelf.
Date - Shows the date in month and day for each event when it was first
reported.
Time - Shows the time in hours, minutes, and seconds for each event
when it was first reported.
TID - Shows the target identifier assigned to the network element.
Product Type - Shows the category or type of network element.
Local Ring - Shows either yes or no to indicate if the network element is in the
local ring.
To Next Page
Loading...
Need help?
General