Lucent Technologies FT-2000 OC-48 User Manual

Craft Interface Terminal Usage
11-172 Issue 8.0 July 2002
53. Enter y for the "yes" selection and press .
54.
NOTE:
You just used CONFIGURATION-Set-State-T3 to set the administrative
state of port 1 of slot 1A to NMON. You will now use
CONFIGURATION-Retrieve-T3 to look at the value of that parameter.
Press to return to the INPUT mode.
ENTER
F3

Lucent Technologies FT-2000 OC-48 Specifications

General

Brand	Lucent Technologies
Model	FT-2000 OC-48
Category	Network Hardware
Language	English