IMPORTANT INFORMATION - 1B-390-824052R3 JUNE 2002
1
1 - Throttle/Shift Linkage Pivot Point Lubrication
52183
2
2 - Upper Shift Shaft Lubrication
4
3
3 - Tilt Lock Lever Grease Fitting
4 - Swivel Pin Grease Fittings
RIDE-GUIDE STEERING CABLE AND PIVOT
POINTS LUBRICATION
WARNING
Core of steering cable (transom end) must be
fully retracted into cable housing before
lubricating cable. If cable is lubricated while
extended, hydraulic lock of cable could occur.
With core of Ride-Guide Steering cable (transom
end) fully retracted, lubricate transom end of steering
cable thru grease fitting and exposed portion of cable
end with Quicksilver 2-4-C w/Teflon. Lubricate all
pivot points with SAE 30W engine oil.
7
5
6
5 - Ride-Guide Steering Cable Grease Fitting
6 - Tilt Tube Grease Fitting
7 - Steering Link Rod Pivot Point Lubrication
To Next Page
Loading...
Need help?
General
